SONY 4K PROJECTOR HOME CINEMA 4K( VPLVW385ES)

$10,499.99

  • High Brightness of 1,500 Lumens
  • 200, 000: 1 Dynamic Contrast
  • Advanced Reality Creation
  • HDR Compatibility

Contact us for price quote and in-store availability.

Check Availability
Save A BundleHave A Question?Can't Find What I Want

Description

 

VPLVW385ES

Size & Weight
Dimensions (W x H x D) 19 1/2 x 7 11/16 x 18 1/4 inches
Weight Approx. 14 kg / 31 lb.
Display
Display System 4K SXRD panel, projection system
Display Resolution Computer signal input: Maximum display resolution: 1,920 x 1,080 dots (HDMI Input only) / Video signal input: 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p, 1080/24p, 3840 x 2160/24p, 3840 x 2160/25p, 3840 x 2160/30p, 3840 x 2160/50p*1, 3840 x 2160/60p*1, 4096 x 2160/24p, 4096 x 2160/25p, 4096 x 2160/30p, 4096 x 2160/50p*1, 4096 x 2160/60p*2
Light source High-pressure mercury lamp, 225 W type
General Features
Contrast ratio 200,000:1 (Dynamic Contrast)
Effective display size 0.74” x 3
Effective pixels 26,542,080 (4096 x 2160 x 3) pixels
Projection lens shift Vertical: 85% -80% Horizontal: /-31%
Screen size 60" to 300" (1,524 mm to 7,620 mm)
Hardware
Projection lens zoom / focus Powered (Approx. x2.06)
Interface
Input and Output Terminals HDMI (2 INPUTS)*3 - Digital RGB/Y Pb/Cb Pr/Cr, IR IN - Minijack, LAN - RJ45, 10Base-T/100BASE-TX, REMOTE - RS-232C, D-sub 9-pin (female), TRIGGER (2 INPUTS) - Minijack, DC 12 V Max. 100 mA, USB - DC 5 V, Max. 500 mA
Operating Conditions
Operating temperature / humidity 5°C to 35°C (41°F to 95°F)/20% to 80% (no condensation)
Storage temperature / humidity -10°C to 60°C (14°F to 140°F)/20% to 80% (no condensation)
Power
Acoustic noise 26 dB
Power requirement AC100 V to 240 V, 3.5 A to 1.5 A, 50/60 Hz
Power consumption 350 W
Video Features
Light Output 1,500 lm (Lamp mode: High)
*4
Color Light Output 1,500 lm (Lamp mode: High)
*4
Eco and energy saving
Power Consumption (Standby Mode) 0.3 W (when 'Remote Start' is set to 'Off')
Power Consumption (Networked Standby Mode) – Terminals 1.0 W (LAN) (when “Remote Start” is set to “On”) When a LAN terminal is not connected, it goes into low power consumption mode (0.5 W).
Standby Mode Activated After about 10 Minutes

Additional information

Brand

Have A Question?

We are here to help. Use the contact form below and we will reply as soon as possible.